Video and Audio

• IP Video Input
  32-ch
  Up to 32 MP resolution
  *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24
  MP IP video inputs.
• Incoming Bandwidth
  320 Mbps
• Outgoing Bandwidth
  400 Mbps
• HDMI 1 Output
  8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz
• HDMI 2 Output
  4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz
  *: When HDMI 1 output resolution is 8K, the maximum HDMI 2 output resolution is 1080p.
• VGA Output
  1920 × 1080/60Hz
• Video Output Mode
  HDMI1/VGA simultaneous output, HDMI2/VGA independent output
• CVBS Output
  1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480
• Audio Output
  1-ch, RCA (Linear, 1 KΩ)
• Two-Way Audio
  1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)

Decoding

• Decoding Format
  H.265+/H.265/H.264+/H.264
• Recording Resolution
  32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF
  *: After ultra HD resolution mode is enabled, the NVR supports up to 8-ch 32 MP/24 MP IP video inputs.
• Synchronous Playback
  16-ch
• Decoding Capability
  2-ch@32 MP (30 fps)+2-ch@8MP（30fps）/10-ch@8 MP (30 fps)/20-ch@4 MP (30 fps)/40-ch@1080p (30 fps)
• Dual-Stream Recording
  Support
• Stream Type
  Video, Video & Audio
• Audio Compression
  G.711ulaw/G.711alaw/G.722/G.726/AAC/MP2L2

Network

• Remote Connection
  128
• Network Protocol
  TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS, ONVIF(Version 2.2), OTAP
• Network Interface
  2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces
• Camera Access Protocol
  ONVIF(Version 2.5), RTSP

RAID

• RAID Type
  N/A

Auxiliary Interface

• eSATA
  1 eSATA interface
• SATA
  4 SATA interfaces
• Capacity
  Up to 16 TB capacity for each disk
• Serial Interface
  2 RS-485 (half-duplex), 1 RS-232
• Alarm In/Out
  16/9
• USB Interface
  Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0
• Ctrl 12V
  Controllable 12 VDC, 1 A power output for external alarm device; The power will be turned on when the alarm output is triggered.
  *: The Ctrl 12V power is controlled by alarm output 9.
• DC 12V
  12 VDC, 1 A power output

General

• Power Supply
  100 to 240 VAC, 50 to 60 Hz
• Consumption
  ≤ 15 W (without HDD )
• Working Temperature
  -10 °C to 55 °C (14 °F to 131 °F)
• Working Humidity
  10% to 90%
• Chassis
  19-inch rack-mounted 1.5U chassis
• Dimension (W × D × H)
  445 × 400 × 75 mm ( 17.5″× 15.7″ × 3.0″)
• Weight
  ≤ 5 kg (without HDD, 11 lb.)

Certification

• FCC
  Part 15 Subpart B, ANSI C63.4-2014
• CE
  EN 55032:2015+A1:2020, ENIEC61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A1:201
  9, EN 50130-4:2011+A1:2014, EN 55035:2017+A11:2020